Contents of SRE Head & Rotor Pkg.
SRE Head & Rotor Pkg. 90-2396
Bearing Pkg. 90-2014
Head Assy., SRE ALK-1132BS-1
Rotor ALE-2173S-1

NOTES:
1. Bearing & Seal Pkg. Also Included With Rotor & SRE Head Assy.
2.  ALE-1013AS Captive Brush & Spring Set Also Individually Available For Unit Already Having This Design. Earlier Units Must Replace The Complete Brush Holder Assy. If Brushes or Springs Are Required.
3. Brush Set Only; Brush Spring Set ALA-19S Also Available.
4. SRE Head & Rotor Pkg. Complete Package Must Be Used At Time of First Repair. Individual Components May Be Used Thereafter.

No.Description Part No.ALE
6406
ALE
6406G
ALE
6420
ALE
6420G
ALE
8105A
ALE
8406
ALE
8406G
ALE
8408
ALE
8420
ALE
8420G
ALE
8421
   
1Rotor Assembly90-2396(d)
ALE-2173S-1
ALE-2016
2Brush SetALE-1013AS
ALU-1012LS(c)
3Brush Holder & Spring Asm.ALU-1045BS(b)
ALU-1045BS
ALE-1045BS(b)
4Slip Ring End Head Asm.90-2396(d)
ALK-1132BS-1
ALE-1002LS
5SRE Bearing90-2014(a)
X-3417
6Drive End Head Asm.ALE-1003K
7DE BearingX-3416
8Stator AssemblyALE-2008A-D
ALE-2008Z
9Pos. Rectifier & Plate Asm.ALE-1054A
ALE-1004
10Negative Rectifier (Pkg. Of 3)XA-944JS
11Terminal Stud Package90-2030
90-2359
12DE RetainerGR-32
13Slip Ring End CoverALE-1062
ALU-1062A
14Eyelet Package90-818
15Thru Bolt PackageALA-20JS
ALA-20FS
16Nut & Washer Package90-33
17Rotor Shaft SpacerALD-21
18Vent Fan (2 pc.)90-2241
19Drive PulleyPU-672A
Contents of 902399 SRE Head & Rotor Pkg.
Bearing Pkg. 90-2014
Head Assy., SRE ALK-1132AS-1
Rotor ALH-2128S-1

NOTES:
1. SRE Head & Rotor Pkg., Complete Pkg. Must Be Used At Time Of First
2. Repair. Individual Components May Be Replaced Thereafter.

NO.DESCRIPTIONPART NO.ALH-5105ALH-5106SALH-5406ALH-5420
1Rotor AssemblyALH-2006A
90-2399(a)
ALH-2128S-1
2Brush SetALE-1012LS
ALB-1013BS
ALE-1013AS
3Brush Holder & Spring Asm.ALU-1045BS
4Slip Ring End Head Asm.ALH-1002CS
ALH-1002DS
90-2399(a)
ALK-1132AS-1
5SRE BearingX-3417
90-2014(b)
6Drive End Head Asm.ALE-1033
ALE-1033K
7DE BearingX-3415
X-3416
8Stator AssemblyALE-2008R
ALE-2008AA
9Pos. Rectifier & Plate Asm.ALE-1004
ALE-1054A
10Negative Rectifier PackageXA-944JS
11Brush Spring SetALA-19S
12Term. Stud Package90-2359
90-990
90-2043
13DE RetainerGGW-91
GR-32
14Thru Bolt PackageALA-20ES
ALA-20GS
15Eyelet Package90-818
16Nut & Washer Package90-33
17Rotor Shaft SpacerALH-21A
ALC-21F
18Vent Fan (2 pc.)90-2241
19Drive PulleyPU-598E
No.DESCRIPTIONPART NO.ALM-5103
1Rotor AssemblyALM-2028
2Brush SetALE-1012LS
3Slip Ring End Head Assy.ALE-1002GS
4SRE BearingX-3417
5Drive End Head AssemblyALM-1003
6DE BearingX-3416
7Stator AssemblyALE-2008G
8Negative Rectifier (Pkg. Of 3)XA-944JS
9Positive Rectifier & Plate Assy.ALE-1004
10Term. Stud Package90-2359
11Brush Spring SetALA-19S
12DE RetrainerGR-32
13Thru Bolt PackageALA-20S
14Eyelet Package90-818
Contents of SRE Head & Rotor Pkg.
SRE Head & Rotor Pkg. 90-2397 90-2398
Bearing Pkg. 90-2014 90-2014
Head Assy., SRE ALK-1132BS-1 ALE-1142AAS-1
Rotor ALE-2128S-1 ALU-2138S-1

NOTES:
1. Bearing & Seal Pkg. Also Included With Rotor & SRE Head Assy.
2.  ALA-19S Brush Spring Set Also Available.
3. ALE-1013AS Captive Brush & Spring Set Also Individually Available For Unit Already Having This Design. Earlier Units Must Replace The Complete Brush Holder Assy. If Brushes or Springs Are Required.
4. XA-1026 DE Oil Seal Also Available.
5. SRE Head & Rotor Pkg. Complete Package Must Be Used At Time of First Repair. Individual Components May Be Used Thereafter.
6. XA-744AZ Shaf t Spacer O-Ring Seal Available.
7. Nut Only; Washer Not Required.

No. Description Part No.  ALT-5101AALT-5102SALT-8403ALT-8404ALT-8404SALT-8407ALT-8420ALT-8421ALT-8421SALT-9405ALT-9422
1Rotor AssemblyALT-2006
90-2397 (e)
ALU-2128S-1
90-2398(e)
ALU-2138S-1
2Brush Set
Brush Holder & Spring Assy.
ALE-1012LS(b)
ALB-1013BS(b)
ALE-1013AS
3ALU-1045BS(c)
ALU-1045BS(c)
4Slip Ring End Head Assy.ALH-1002CS
ALH-1002DS
90--2397(e)
ALK-1132AS-1
90-2398(e)
ALE-1142AAS-1
5SRE BearingX-3417
90-2014(a)
6Drive End Head Assy.
DE Bearing
ALE-1033
ALE-1003K
ALU-1043(d)
7X-5077
X-3416
X-4087
8Stator AssemblyALE-2008r
ALE-2008AA
9Positive Rec. & Plate Assy.ALE-1004
ALE-1054A
10Negative Rec. (Pkg. Of 3)XA-944JS
11Terminal Stud Pkg.90-2359
90-990
90-2043
90-2030
12DE RetainerGGW-91
GR-32
13Thru Bolt Pkg.ALA-20ES
ALA-20GS
14Eyelet Pkg.90-818
15SRE CoverALU-1062
ALU-1062A
16Nut & Washer Pkg.90-33
8X-4075(g)
17Rotor Shaft SpacerALH-21A
ALC-21F
ALD-21
ALU-23(f)
18Vent Fan (2 pc.)90-2241
90-2241
90-2259
19Drive PulleyPU-598E
PU-672A
Contents of SRE Head & Rotor Pkg.
SRE Head & Rotor Pkg. 90-2397 90-2398
Bearing Pkg. 90-2014 90-2014
Head Assy., SRE ALK-1132AS-1 ALE-1142AAS-1
Rotor ALE-2128S-1 ALU-2138S-1

NOTES:
1. Bearing & Seal Pkg. Also Included With Rotor & SRE Head Assy.
2.  ALE-1013AS Captive Brush & Spring Set Also Individually Available For Unit Already Having This Design. Earlier Units Must Replace The Complete Brush Holder Assy. If Brushes or Springs Are Required.
3. XA-1026 DE Oil Seal Also Available.
4. SRE Head & Rotor Pkg. Complete Package Must Be Used At Time of First Repair. Individual
5. Components May Be Used Thereafter.
6. XA-744AZ Shaf t Spacer O-Ring Seal Available.
7. Nut Only; Washer Not Required.

NO.DESCRIPTIONPART NO.ALU-6421SALU-8403ALU-8403SALU-8421ALU-8421SALU-9404ALU-9422
1Rotor Assembly90-2397(d)
ALU-2128S-1
90-2398(d)
ALU-2138S-1
2Brush SetALE-1013AS
3Brush Holder & Spring Assy.ALU-1045BS(b)
ALU-1045BS
4Slip Ring End Head Assy.90-2397(d)
ALK-1132AS-1
90-2398(d)
ALE-1142AAS-1
5SRE Bearing & Seal Pkg.90-2015(a)
6Drive End Head Assy.ALE-1003K
ALU-1043(c)
7DE BearingX-3416
X-4087
8Stator AssemblyALE-2008AB
9Positive Rec. & Plate Assy.ALE-1054A
10Negative Rec. PackageXA-944JS
11Term Stud Package90-2030
90-2043
12SRE CoverALU-1062A
13DE RetainerGR-32
14Thru Bolt PackageALA-20GS
15Eyelet Package90-818
16Nut & Washer Package90-33
8X-4075(f)
17Rotor Shaft SpacerALD-21
ALU-23(e)
18Vent Fan (2 pc.)90-2241
19Drive PulleyPU-672A

NOTES:
1. XA-1104 DE Oil Seal Also Available.
2.  Used Only On Early Production Units Having Snap Ring at Slip Ring End of Rotor Shaft.
3. Nut Only; Washer Not Required.
4. XA-744AZ Shaft Spacer O-Ring Seal Also Available.

NO.DESCRIPTIONPART NO.ALV-6403SALV-8402ALV-8402ALV-9401ALV-9406ALV-9407ALV-9405ALV-9407SALV-9510
1Rotor AssemblyALV-2026A
ALV-2006A
2Brush AssemblyALV-1012S
3Slip Ring End Head Assy.ALV-1022S
ALV-1002S
ALV-1002AS
4SRE BearingX-3626A
X-4087

5Drive End Head Assy.ALB-2003A
ALV-1003(a)
ALV-1003A(a)
6DE BearingX-4086
7Stator AssemblyALV-2008A
8Brush Holder & Bkt.ALV-1015
9Brush Spring SetAMA-19S
10Positive rec. & Plate Assy.ALVl-1004
11Negative Rec. & Plate Assy.ALV-1004A
12Vent Cover Assy.ALV-1031
13SRE Bearing CoverGJT-47
14SRE RetainerGR-32
15Capacitor & Term Assy.AVL-1038S
16Term Stud Pkg.90-2040
90-2046
17Lock Tab Pkg.MES-98S
18Eyelet Package90-818
19Thru Bolt Pkg.ALB-20AS
ALB-20AS-1
20Bearing O-Ring SealXA-744AB
21Nut & Washer Pkg.90-33
8X-4075(b)
22Rotor Shaft SpacerALB-21
ALV-21(d)
23Vent FanPU-1609A
Contents of SRE Head & Rotor Pkg.
SRE Head & Rotor Pkg. 90-2399 90-2401 90-2401 90-2409
Bearing Pkg. 90-2014 90-2014 90-2014 90-2014
Head Assy., SRE ALK-1132AS-1 ALE-1142AAS-1 ALE-1142AAS-1 ALE-1142AAS-1
Rotor ALE-2128S-1 ALU-2138S-1 ALX-2138S-1 ALH-22065-1

NOTES:
1. Bearing & Seal Pkg. Also Included With Rotor & SRE Head Assy.
2.  ALE-1013AS Captive Brush & Spring Set Also Individually Available For Unit Already Having This Design. Earlier Units Must Replace The Complete Brush Holder Assy. If Brushes or Springs Are Required.
3. XA-1026 DE Oil Seal Also Available.
4. SRE Head & Rotor Pkg. Complete Package Must Be Used At Time of First Repair. Individual
5. Two (2) Piece Fam Assy.
6. Also Included With Rotor.
7. Nut Only; Washer Not Required.

NO.DESCRIPTIONPART NO.ALX-6408ALX-6423ALX-8403ALX-8403GALX-8403SALX-8403SGALX-8421ALX-8421GALX-8421SALX-8421SGALX-9402ALX-9404ALX-9404GALX-9405ALX-9422ALX-9422GALX-9424ALX-9425ALX-9425AALX-9425B
1Rotor Assembly90-2399(e)
ALH-2128S-1
90-2409(e)
90-2400(e)
90-2401(e)
ALH-2138S-1
ALX-2138AS-1
ALH-2206S-1(b)
2Brush SetALE-1013AS
3Brush Holder & Spring Assy.ALU-1045BS
ALU-1045BS(c)
4Slip Ring End Head Assy.90-2399(e)
ALK-1132AS-1
90-2409(e)
90-2400(e)
90-2401(e)
ALE-1142AAS-1
5SRE Bearing & Seal Pkg.90-2014(a)
6Drive End Head Assy.ALE-1003R
ALE-1003K
ALU-1003
ALU-1043(d)
7DE BearingX-3416
X-4087
X-5398
8Stator AssemblyALE-2008AB
9Positive Rec. Plate Assy.ALE-1054A
10Negative Rec. (Pkg. Of 3)XA-944JS
11Term Stud Pkg.90-2043
90-2030
12SRE CoverALU-1062A
ALX-1062S
13Thru Bolt Pkg.ALA-20GS
14DE RetainerGR-32
15O-Ring SealXA-744AZ
16Eyelet Package90-818
17Nut & Washer Pkg.90-33
8X-4075(h)
18Rotor Shaft SpacerALG-21F
ALC-21F
ALU-23
19Vent Fan (2pc.)90-2259(f)
90-2241(f)
ALP-1034(g)
20Drive PulleyPU-672A
Contents of SRE Head & Rotor Pkg.
SRE Head & Rotor Pkg. 90-2396
Bearing Pkg. 90-2014
Head Assy., SRE ALK-1132BS-1
Rotor ALE-2173S-1

NOTES:
1. Bearing & Seal Pkg. Also Included With Rotor & SRE Head Assy.
2.  ALE-1013AS Captive Brush & Spring Set Also Individually Available For Unit Already Having This Design. Earlier Units Must Replace The Complete Brush Holder Assy. If Brushes or Springs Are Required.
3. SRE Head & Rotor Pkg. Complete Package Must Be Used At Time of First Repair. Individual
4.Components May Be Used Thereafter.

No. Description Part No.  ALY-8402ALY-8403ALY-8403G ALY-8403SGALY-8405ALY-8405GALY-8410ALY-8411ALY-8420ALY-8420GALY-8420SALY-8420SGALY-8423ALY-8424ALY-8426ALY-8426G
1Rotor Assembly90-2396(c)
ALE-2173S-1
2Brush SetALE-1013ASbbbbbbbbb
3Brush Holder & Spring Assy.ALU-1045BS(b)
ALE-1045BS(b)
ALU-1045BS
ALE-1045BS
4Slip Ring End Head Assy.90-2396(c)
ALK-1132BS-1
5SRE Bearing & Seal Pkg.90-2014(a)
6Drive End Head Assy.ALE-1003K
7DE BearingX-3416
8Stator AssemblyALE-2008AE
9Positive Rec. & Plate Assy.ALE-1054A
10Negative Rec. (Pkg. Of 3)XA-944JS
11Term Stud Pkg.90-2043
90-2030
12DE RetainerGR-32
13Thru Bolt Pkg.ALA-20JS
14Eyelet Package90-818
15SRE CoverALU-1062
ALU-1062A
ALU-1062D
16Nut & Washer Pkg.90-33
17Rotor Shaft SpacerALC-21F
ALD-21
18Vent Fan (2 pc.)90-2259*
90-2241
19Drive PulleyPU-672A

 

Contents of SRE Head & Rotor Pkg.
SRE Head & Rotor Pkg. 90-2396 90-2402
Bearing Pkg. 90-2014 90-2014
Head Assy., SRE ALK-1132BS-1 ALK-1132BS-1
Rotor ALE-2173S-1 ALE-2177S-1

NOTES:
1. Bearing & Seal Pkg. Also Included With Rotor & SRE Head Assy.
2.  ALE-1013AS Captive Brush & Spring Set Also Individually Available For Unit Already Having This Design. Earlier Units Must Replace The Complete Brush Holder Assy. If Brushes or Springs Are Required.
3. SRE Head & Rotor Pkg. Complete Package Must Be Used At Time of First Repair. Individual

No. Description Part No.  ALY-6403ALY-6403GALY-6406ALY-6406GALY-6408ALY-6409ALY-6412ALY-6420ALY-6420GALY-6421ALY-6422ALY-6425ALY-6427ALY-6427G
1Rotor Assembly90-2396(c)
90-2402(c)
ALE-2173S-1
ALE-2177S-1
2Brush SetALE-1013ASbbbbb
3Brush Holder & Spring Assy.ALU-1045BS
ALU-1045BS(b)
ALE-1045BS(b)
ALE-1045BS
4Slip Ring End Head Assy.90-2396(c)
90-2402(c)
ALK-1132BS-1
5SRE Bearing & Seal Pkg.90-2014(a)
6Drive End Head Assy.ALE-1003K
ALE-1003R
7DE BearingX-3416
8Stator AssemblyALE-2008AE
9Positive Rec. & Plate Assy.ALE-1054A
10Negative Rec. (Pkg. Of 3)XA-944JS
11Terminal Stud Package90-2030
90-2043
12DE RetainerGR-32
13Thru Bolt PackageALA-20JS
14Eyelet Package90-818
15SRE Cover
16Nut & Washer Pkg.90-33
17Rotor Shaft SpacerALD-21
ALD-21A
ALC-21F
18Vent Fan (2 pc.)90-2241
90-2259
19Drive PulleyPU-672A
PU-676A
PU-692A

 

Contents of SRE Head & Rotor Pkg.
SRE Head & Rotor Pkg. 90-2396
Bearing Pkg. 90-2014
Head Assy., SRE ALK-1132BS-1
Rotor ALE-2173S-1

NOTES:
1. Bearing & Seal Pkg. Also Included With Rotor & SRE Head Assy.
2.  ALE-1013AS Captive Brush & Spring Set Also Individually Available For Unit Already Having This Design. Earlier Units Must Replace The Complete Brush Holder Assy. If Brushes or Springs Are Required.
3. Complete Package Must Be Used At Time of First Repair. Individual Components May Be Used Thereafter.

No. Description Part No.ALZ-8401ALZ-8401GALZ-8401ALZ-8423ALZ-8423G
1Rotor Assembly90-2396(c)
ALE-2173S-1
2Brush SetALE-1013AS
3Brush Holder & Spring Asm.ALU-1045BS(a)
ALU-1045BS
4Slip Ring End Head Asm.90-2396(c)
ALK-1132BS-1
5SRE Bearing & Seal Pkg.90-2014(b)
6Drive End Head Asm.ALE-1003K
7DE BearingX-3416
8Stator AssemblyALE-2008AG
9Pos. Rectifier & Plate Asm.ALE-1054A
10Negative Rectifier (Pkg. Of 3)XA-944JS
11SRE CoverALU-1062A
12DE RetainerGR-32
13Term Stud Package90-2030
14Thru Bolt PackageALA-20JS
15Eyelet Package90-818
16Nut & Washer Package90-33
17Rotor Shaft SpacerALD-21
18Vent Fan (2 pc.)90-2241
19Drive PulleyPU-672A

 

Contents of SRE Head & Rotor Pkg.
SRE Head & Rotor Pkg. 90-2403
Bearing Pkg. 90-2014
Head Assy., SRE ALK-1132AS-1
Rotor ANG-2128S-1

NOTES:
1. Bearing & Seal Pkg. Also Included With Rotor & SRE Head Assy.
2.  Repair. Individual Components May Be Replaced Thereafter.
3. Bearing & Seal Pkg., Also Included With Rotor & SRE Head Assy.

No.DESCRIPTIONPART NO.ANG-6401ANG-6401ANG-6423ANG-6423S
1Rotor Assembly90-2403(a)
ANG-2128S-1
2Brush SetALE-1013AS
3Brush Holder & Spring Assy.ALU-1045BS
4Slip Ring End Head Assy.90-2403(a)
ALK-1132S-1
5SRE Bearing & Seal Pkg.90-2014(b)
6Drive End Head Assy.ALE-1003R
7DE BearingX-3416
8Stator AssemblyALE-2008AH
9Pos. Rectifier & Plate Assy.ALE-1054A
10Negative Rectifier (Pkg. Of 3)XA-944JS
11Term. Stud & Parts Pkg.90-2043
12DE RetainerGR-37
13Eyelet Package90-818
14Thru Bolt PackageALA-20GS
15Nut & Washer Package90-33
16Rotor Shaft SpacerALC-21F
17Vent Fan (2 pc.)90-2259